Protecting your Interlocking Pavers – Tips on using a sealer

protecting-interlocking-pavers-using-a-sealer

If your neighbor is able to keep his driveway or patio looking brand new and vibrant, chances are he has used a Paving Stone Sealer. Paving Stone Sealers minimize or eliminate the porosity of most stone. If the stone is left unsealed, it will be most certainly be prone to certain types of damage such as
oil, salt, rust, harsh pool chemicals, colour fading from UV rays, dirt, and even autocare products.

Although applying the paving stone sealer isn’t difficult, having the right equipment to do it makes it simpler and easier to manage. Here is a list of the most essential and necessary equipment:

  • Paint Roller (thick nap) or Pump Sprayer
  • Rubber Gloves (throw away)
  • Goggles (you really don’t want this stuff in your eyes)
  • Work Pants (don’t care if you get sealer on it)
  • Work Boots (if you get this stuff on your sneakers, they will be ruined)
  • Pressure washer or hose with nozzle

In addition to having the right equipment for the job, here are some professional tips before applying, applying and using the paving stone sealer to keep that fresh and new look for your interlocking stones:

1. Remove all oil, grease, dirt

You can use the proper cleaners or use a power washer/hose with nozzle and allow the surface to dry for 24 hours before applying the sealer. If you are using a power washer, keep the angle at a shallow angle to minimize the loss of joint sand.

2. Removing efflorescence

Allow 30 to 60 days for the efflorescence (whitish salt) to escape from the stone. If the efflorescence is still visible, use efflorescence cleaner to remove it and let it dry 24-48 hours and then sweep the paving stones with a stiff bristled brush.

3. Keep water away

If you get water on the surface or on the roller while applying, a cloudy spot will form on the paving stone surface. If you sweat a lot, consider wearing a hat or headband to keep the sweat from dripping onto the sealer.

4. Watch the weather

Keep your eye on the weather as you do not want to apply the sealer below 10 degrees, or when there is a chance of rain (surface must be dry for at least 24 hours).

5. Increase durability

You can increase the durability of the surface when you apply the sealer in two thin coats than one thick coat. This will also reduce the possibility of the paving stone surface turning white.

6. Prevent streaking

For surfaces being sealed for the first time, apply a second coat by rolling in a cross direction than the first coat to prevent streaking. Allow first coat to dry prior to second coat application (drying time dependent on sealer brand). Allow sealed surfaces to dry for 24 hours before using. This will be more apparent on large flat surfaces such as flagstone.

6. Cleaning your tools

You must clean the tools immediately after the application. If you use a solvent-based sealer, use a lacquer thinner to clean the nozzle, canister and hose of your pump sprayer.

Polymeric Paver Sand – A Weed-Free and Insect-Free Solution

Now that you have your own backyard escape area using Interlocking Pavers, you wonder how your friends backyard patio looks so clean and sharp for many years. The secret of countless happy homeowners is the use of Polymeric Sand.

Polymeric Sand is the key to stabilizing your Interlocking Pavers and getting that weed-free, insect-free finished look. In fact, it should always be used once you’ve completed your landscaping project and not be thought as an option. With the use of Polymeric Sand, erosion has been virtually eliminated – no more re-filling sand year in and year out.

Although applying the Polymeric Sand is fairly straightforward, here are some tips that will help you get that clean finished look you were after:

1. Check for rain-free weather

Make sure that have at least 2-4 days of sunny weather with NO chance of rain or precipitation. You want to make sure that the glue in the sand has a chance to activate properly and harden without getting washed out.

2. Use a proper broom

Using a wide broom will help you distribute the sand across all the joints more evenly. Avoid corn brooms as they can potentially leave bits and pieces of broom in the crevices and potentially weakening the joint.

3. Use a compactor

After you pushed all the sand into the joints with a broom, use a power compactor with a rubber sleeve or base to help you get the sand into every single crevice and crack. This is almost like an insurance policy to help prevent weeds from growing and insects making those spaces their home.

4. Use a leaf blower

After you’ve swept in the sand or used the compactor into all the joints, blow the sand away at an angle nearly parallel to the surface of the patio. The key is to remove all the sand on the surface of the patio pavers. You don’t want the glue and sand to sit on the surface of the stone once it has been activated, especially if it is smooth patio stones.

5. Use water misting only

By using water misting to activate the glue in the sand, you do not wash away the sand between the patio stones before it has a chance to harden.

How to Install Interlocking Patio Pavers Tips – Part 2

If you missed part 1, of how to install interlocking patio pavers tips, you can click here.

Now that you’ve done your research, visualized your project, received free advice, determined your timeline and budget and possibly hired local help, its time to dig in and watch your dream landscape come to life.

Here are some additional tips that we think will help you to keep your project moving forward:

1. Keep your sketch or drawing close by

You’ve spent all that effort to visualizing your dream landscape, make sure you have it handy so that everything goes to plan. Better yet, make photocopies or scan your plan just in case it gets lost, waterlogged, ripped, eaten by the dog, or even buried (yeah, it has happened before!).

2. Getting the proper tools

You want to keep your significant other happy, get the rights tools so you can get the job done faster and better. Forget the snow shovel and go out and buy the right tool(s) or just rent them.

3. Stake it right

Make sure that when you stake out the dimensions of the project, it is important to keep your measurements consistent to your drawings to avoid shortage or overage of materials.

4. Keeping the edge straight

During installation you will need to use string between the stakes as a guide to help keep your interlocking pavers straight. If you want your pavers to stay straight for many years to come, think of installing landscape edging.

5. Tamping the sand

After you have applied the polymeric sand with a broom, use a tamper with a rubber pad to ensure that the sand fills in all the cracks properly. Once the polymeric sand activates, you are going to get a strong cohesive surface that will resist weeds and keep your landscape looking pristine.

6. More free landscaping advice

Just because you’ve started work, it doesn’t mean that you can’t still ask for advice. This is especially true if you encountered something unexpected like a large tree root. It won’t cost you anything and it may save you heartache and frustration down the road.

7. Don’t stop unnecessarily

Place your sand, gravel and stone in piles along the project perimeter so you don’t need to stop when you run out. This will help you keep focus on getting the project done. Don’t forget to cover the piles overnight to protect the sand from the rain.

8. Using a stone cutter

If you want smooth cut curve for your interlocking stone, rent a stone cutter or take it to your local garden centre to get cut it for you.

9. Keeping the help happy

If you’ve decided that you want to hire labour, save time and money by providing food and snacks so your help can stay onsite and help you finish your project faster.

How to Install Interlocking Patio Pavers Tips – Part 1

Interlocking pavers is probably one of the most cost effective and aesthetically pleasing products on the marketplace to add value to your property. The myriad of colors, shapes, sizes from a multitude of manufacturers will allow you to create the spectacular patio, walkway, terrace, or driveway that you dreamed of while adding value to your home.

As with any DIY project, installing interlocking pavers requires a bit of patience, time and elbow grease to come up with the finished look that you want. Here are some guidelines on how to prepare for the installation of interlocking pavers.

1. Research Interlocking Pavers and Materials

This is probably one of the most important parts of installing interlocking pavers. Good solid research will make your project a relatively smooth one. Here are some key questions you need to ask yourself:

  • What do you want to do or accomplish or build and where do you want to build it? (e.g. pathway, terrace, patio, driveway, etc.)
  • Ask for product catalogs and pricing sheets
  • Visit the interlocking paver manufacturer’s website or visit our showroom or check out their picture gallery for ideas on things can be done.
  • Ask questions to help understand the myriad of options and choices available such as mixing and matching stones from different manufacturers to create that unique look.

2. Draw and Sketch Your Landscape Vision

You don’t have to be a graphic artist to help you visualize your dream landscape. Roughly drawing your landscape layout will help you gather your thoughts and guide you through to the end of your project. By having your vision articulated on paper, you can always easily fine-tune your project with an eraser and pencil. You can start now by downloading this graph paper and sketch away.

3. Taking Measurements

Measure the perimeter (sides) of the project. There are two approaches to measuring out the project.

  • First method – use your garden hose to mark the area where the interlocking stone will be laid down. It is not the most accurate, but it does give you a good idea of how much square footage is being used.
  • Second method – use wooden stakes and string and precisely mark out the area and then measure with a measuring tape.

With the second method, you eliminate the need to stake out the area again when you start digging, thus saving you some time and effort later on.

4. Smart Budgeting

Understanding how much want to spend and sticking with it will give you great satisfaction when you finish. There are typically 3 types of expenses you need budget or account for:

  • Variable Expenses – These expenses are typically related specifically with the quantity, type, size, and color of the interlocking paver.
  • Fixed Expenses – The expenses are the sand and gravel that you require to build a solid foundation. Regardless of what type of interlocking stone you decide to go with, you will typically have the same amount of sand and gravel.
  • Miscellaneous Expenses – These expenses are extraneous items that will help you complete the project such as renting equipment, bins for waste disposal, and accessories.

5. Free Landscaping Advice

It doesn’t hurt that once you’ve got your plans put together to get some free expert advice. Call us and we will help you fine tune your landscape project and provide a quotation on all the required materials.

6. Timing it Right

Once you have finalize your plans, make sure you block out enough time in your schedule (eg. 1 day for 4 weekends, 2 days for 2 weekends) to complete the job in a timely manner. Don’t schedule a project a few weeks before an event because time pressure may cause you to make costly mistakes. Always give yourself extra time to compensate for any unforeseen delays such as rainy days. Lastly, the key to timing is to estimate the pace that you want to work at.

7. Pre-ordering for Less Headaches

Placing your pre-order for materials is also important to making sure that you are off to a smooth start. Landscape materials such as interlocking stone typically require a 24 hour notice for delivery while bulk materials have a turnaround of 4-6 hours. Other items such as bin rentals or tool rentals require 4-6 hours’ notice to ensure that the items are available.

8. Hiring your Friends/Family

Getting your friends and/or family to help you with a part of the job or the entire job will allow you to complete the job faster and make it far more enjoyable.

9. Hiring Local Labour

If none of your friends and/or family can help you out, you can always find local help through your local classified ads (Kijiji or Craigslist). For example, you may need someone to help you dig out the dirt and remove it or move the sand and gravel for you from the driveway to the project area. Make sure that you do your due diligence on the individual(s) and provide right tools to get the job done correctly.

10. Giving Yourself a Break

If you are doing this yourself, remember to give yourself a break every few hours or so that you can last through the day and for the entire project. Have plenty of fluids like water and snacks close by so you grab them when you need them.

To start reading about Part 2 of installing interlocking pavers, go here

Garden Landscaping Trends for 2012

Garden landscaping trends for 2012 are exciting and unique. We have selected three trends that we think are impactful and timeless. Read on below:

1. Interlocking Paver (Brick) borders and the usage of contrast:

 

Borders are a great way to liven up any Interlocking Paver (Brick) project – driveways, walkways or patios. Ultra Black is a popular colour as a border and can be found in our following lines: Adora, Strada, and Bellagio. The vivid tone of black provides a remarkable contrast against all colours.

 

2. Textured Pavers:

 

In recent years, Textured Pavers have become increasingly popular in providing a reasonable alternative to natural stone and impressed concrete. Moderna is an excellent example of a flagstone alternative due to its chiseled surface and irregular shape.

 

3. Incorporating Natural Stone with Concrete:

 

Natural Stone Tread Copings provide an excellent alternative to traditional concrete copings/caps for steps and retaining walls. Tread Copings come in 6ft lengths, which provides a complete look to most steps and retaining walls.

Mississauga Location of Services – Call Before you DIG!

location-services.jpgDue to the wonderful weather we have been having recently, people are beginning to tackle their outdoor garden or landscape projects sooner rather than later.

At Toemar, we highly recommend that before you begin to dig up your property, it is important to pinpoint all the services (e.g. gas, electrical, sewer, cable, telephone, water, and irrigation) located around your landscaped residential property. By taking this precaution, your project will not run into unexpected surprises and possibly very expensive repairs.In Ontario, you can take advantage of the FREE ‘Locate Services’ program. It is a smart way to be assured that your project is safe – both physically and legally. You can book this service online at ON1CALL or call them at 1-800-400-2255

 

 

 

 

 

 

SocialCompare

Firewood For Sale: The Untold Story Behind Toemar in Mississauga

More than 30 years ago, Toemar was the one of the very first companies to have firewood for sale and delivered to the residents of Mississauga and surrounding area, now called the Greater Toronto Area. Our very first customers back in the early 1980’s used our firewood to heat their homes. In fact, some residences in Old Toronto solely relied on this form of heating and as result we felt that it was imperative to make sure that we supplied firewood that was dried and aged properly.
We remember at that time there was tremendous demand for our firewood because it had a solid reputation of providing the best burning experience. There were times when we were making deliveries until 10PM at night to make sure that we fulfilled our promise of same day delivery. Convenience and customer service has always been a core attribute since the beginning and we believe that you should treat others as you want others to treat you. Our unspoken motto at that time was we are not happy unless you are happy which still continues today.
How did we get the reputation for providing the best burning experience for firewood? Our firewood is always aged at least for two years and rotated. Just like a great wine from Niagara-on-the-Lake, we let nature takes it course by properly stacking the firewood in rows. We make sure that firewood has optimal sun exposure and maximum airflow to allow for proper and consistent aging of the firewood resulting in a moisture level around 20% or less. It is a labour intensive process just like making great wine. We take great care in making sure that you enjoy the warmth of the fire instead of airing out your home.
We invite you to come and check out our yard and see how we age the firewood for the perfect burning experience. We know that what we do works and has for the last 30 years. We continue to take pride in going thru the process and we want to make sure that the firewood that you burn today is the same for many years to come. No short cuts equals happy customers.